 printable version
Withdrawal
NOTE When assembling the need to replace the nut 2, 9 and bolt 3 (Fig. 12.29). |
Using the screwdriver blade as a lever, remove the caps from the central part of the drive wheels. Raise the vehicle and remove the rear wheels.
| Fig. 12.21. Location screws protective panel
|
Remove the access panel located in front of the rear axle (see. Fig. 12.21).
| Fig. 12.22. Using a lifter VAG 1383A with adapter VAG 1359/2 to lift the lever rear beam: 1, 2 - bolts
|
Install lifters VAG 1383A with adapters VAG 1359/2 under the arms and lift the rear of the beam so that the rear beam support device (see. Fig. 12.22).
| Fig. 12.29. Front shock absorber: 1 - the shock absorber; 2 - a nut; 3 - a bolt, M10x90, 50 Nm and tighten 90 ?�; 4 - a protective cover; 5 - protective sleeve; 6 - buffer; 7 - bolt 50 Nm; 8 - the top support; 9 - Self-locking nut, 25 Nm; 10 - a cover; 11 - threaded holes in the rear wheel arch
|
| Fig. 12.30. The lower rear shock mounting: 1 - a nut; 2 - a bolt; 3 - shock
|
Remove the nut 1 (Fig. 12.30), remove the bolt 2 and remove the shock absorber 3 from the slot at the rear beam. Turn out bolts 1 (see. Fig. 12.22) securing the top of the rear shock absorber and pull out from under the wing of the car.
| 
