 printable version
Checking oil pressure
| Fig. 3.28. Placement of the oil pressure sensor
|
Remove the pressure sensor, mounted near the oil filter (Fig. 3.28). Connect the sensor instead of a pressure gauge with a scale graduated from 0 to 1000 Pa. Start up the engine and wait until the oil is heated to a temperature of about 90 ?� C. Measure the oil pressure at idle speed and engine speed 2000 min-1. Oil pressure must be to re-bench idling 60 Pa, and at a frequency of BPA-tion of the crankshaft 2000 min-1 - 300 Pa. If the measured pressure does not match the specified values, test the pressure reducing valve and the oil pump.
| 
