Replacing the battery in the remote control

2 Press the side button on the key with remote control 3 and remove the emergency key 4 (Fig. 1.8).

Firmly remove the cover 1 in the direction (arrow in Figure 1.8) with 2 side button key 3.

Release clamps the top of the key 2 1 (Fig. 1.9).

Using a thin screwdriver to remove the top part 3 with a key.

3 Lift the battery using a small screwdriver 2.

Remove the battery 3 in the direction of the arrow from the holder (Fig. 1.10).

Setting

When installing batteries, observe the polarity and position.

2 Insert the battery positive side up with the slope (arrow in Figure 1.11) in the holder 3 key 1 (the positive pole is marked in the body).

Gently press the battery lock in the key.

Then install and snap the top of the key on the key (do not damage the seal).

Then replace the cover key. Insert the emergency key in the key with remote control.