 printable version
The front seats (adjustable by means of electric drive)
By means of the switches A and B can adjust the seat position using the drive (Fig. 1.52). The adjustment can be done and with the ignition off. With handwheel With mechanical adjustment is made of backwater in the lumbar region.
ATTENTION The electric seat adjustment also operates with the ignition off and remove the ignition key. Therefore, children should never be left alone in the car without adult supervision. |
A switch
1 - the seat forward / back. 2 - the front of the cushion up / down. 3 - rear up / down. 2 and 3 simultaneously - seat height adjustment of the seat cushion seat.
The Switch
In the direction of arrow 1: increasing the angle of inclination of the backrest. In the direction of arrow 2: reducing the inclination angle of the backrest.
ATTENTION During the movement of the seat backrests must not be tilted too much back, otherwise the effectiveness of seat belts reduced. |
Memory for driver's seat Memory for driver's seat makes it possible to memorize your individual seat adjustment and exterior mirrors. Maximum three people can t to preset their individual adjustment by pressing one of the memory buttons D. When changing driver pressing seats and exterior mirrors automatically adjust the position of the previously occupy. Through the memory buttons You can add memory and cause of it: - Adjust the driver's seat; - Adjust the position of the door mirrors (left and right) while moving forward; - Adjust the position just right exterior mirror when reversing. Furthermore, by using the remote control key recall the adjustment in accordance with any one key memory. E lock switch at any time to turn off the system memory. Then, the seat and exterior mirrors can be adjusted manually.
Storing adjustments of a seat and external mirrors for advance Turn on the ignition. Adjust the seat position. Set the position of the two exterior mirrors. Press one of the memory buttons D and hold it down for about three seconds until the long beep certifies the successful completion of the process of remembering. These adjustments included in the memory under the chosen key.
NOTE Each new making adjustments to the memory device erases from the memory the previous adjustment on the key. When unplugging from the electrical system battery all contributed to the memory seat adjustment and exterior mirrors are cleared. |
Storing exterior mirror adjustment when reversing It is possible to change the adjusted position of the right mirror for reversing and make new adjustments made in accordance with individual requirements, in the memory. To do this, switch the setting of the door mirrors on the right mirror. Engage reverse gear. Install the right mirror. Press the memory D, which are included in the memory seat adjustment and exterior mirrors when driving forward progress, and hold down the button for about three seconds until the long beep certifies the successful completion of the process of remembering. This adjustment is now entered in the memory under the selected memory button.
NOTE As soon as reverse gear is engaged, the right mirror will move to the preset position. This process is interrupted, when the mirror is installed manually in the new desired position. With each new introduction to the memory seat adjustment and exterior mirrors for forward travel should also re-add memory individual adjustment of the right mirror for reversing. |
Matching remote control key remote control keys Memory To memorized adjustment could also be caused by remote control, there should be harmonization of the radio remote control the remote control button on each memory. It is recommended that one of the two included with the new car remote control key align with the left button of the memory, and the other remote control key - with the middle button. Another remote control key can optionally be ordered in the service enterprise a Volkswagen, and then match it with the right key memory.
Call adjustments of a seat and external mirrors for forward travel The memorized adjustment can be caused by pressing the memory buttons D, and via remote control.
Calling via the memory buttons
For safety reasons, the challenge of adjustment can be performed only when the ignition is switched off. There are two ways to do it: - "Sensory-circuit" - press lightly with the open driver's door key selected memory D. The seat and exterior mirrors automatically take memorized position; - "Manual" - hold down the selected memory button D when the door opens, the driver up until the seat and exterior mirrors finally take memorized position.
NOTE If during the automatic installation of the seat and exterior mirrors again press one of the memory buttons, the current process will interrupt the call. If then again press the memory, interrupt the installation process will continue. If, on the contrary, press one of the other two buttons, the call will be a process of adjustments made to the memory of the key. |
Guidelines on the use of a switch lock E After pressing the switch lock E memory system is deactivated. The seat and mirrors can only be set manually. Repeatedly pressing the switch lock E memory system on again. However, the installation process was interrupted by the memory can not be extended further. It is recommended to turn off the switch of system memory block E when the vehicle is temporarily controlled by the driver, whose individual adjustment of the seat and mirrors had not been entered into the memory.
| 
