REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
			Technical data
			Drive shaft
			Drive shaft with SHRUS ball and Birfield type
			Drive shaft with SHRUS Birfield and tripoidnogo type
			A rotary fist and a nave of a forward wheel
			Rear axle
			Troubleshooting
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Rear axle

1 - a bolt to 50-60 N ??? m;
2 - additional bracket;
3 - draft of the stabilizer;
4 - nut 35-45 N ??? m;
5 - nut 75-90 N ??? m;
6 - trailing arm;
7 - a nut *, 130-150 N ??? m;
8 - a support hub;

9 - the rear brake;
10 - a nave with the bearing;
11 - brake drum;
12 - a nut, 180-220 N ??? m;
13 - the lever (A);
14 - the lever (B);
15 - a nut *, 130-150 N ??? m.

A warning

* The nuts to be temporarily tightened, and the final tightening after setting the vehicle on its wheels.

Withdrawal

PERFORMANCE ORDER

1. Remove the rear wheel.
2. Remove the brake drum.
3. Remove the speed sensor.
	4. Remove the brake hose from the rear strut.
	5. Peel back and remove the collar nut rear hub.
6. Remove the rear wheel hub bearing.
A warning Without the need not to remove the bearing from the hub of the rear wheel.

Check

PERFORMANCE ORDER

1. Check rear wheel bearing for wear and damage.

2. Check the rotor speed sensor on the rear wheel no chipping of teeth.

3. Check the hub for cracks and wear.

4. Check the bearing hub for cracks.

Assembly

PERFORMANCE ORDER

1. Screw a new nut with a fillet and hammer in a nut fillet into a nave groove.

2. Install the hub cap.

« previos page
A rotary fist and a nave of a forward wheel

next page »
Troubleshooting