add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Santa FE
Home
 
Hyundai
Santa FE
Operation and maintenance of car
Engine
Maintenance (engines 2,0 / 2,4 l)
Mechanical (engines of 2.0 / 2.4 L).
Cooling system (engines 2,0 / 2,4 l)
Intake and exhaust systems (engines 2,0 / 2,4 l)
Maintenance (2.7 liter engine)
Check engine oil level
Replacing the engine oil
The choice of the oil filter
Changing the oil filter
Checking the tightness of the cooling system
Check valves radiator cap
Check the antifreeze concentration
Compression Test
Tightening the cylinder head
Adjustment of backlashes of valves
The ancillary drive belts and tensioner
Mechanical (engine displacement of 2.7 liters.)
Cooling system (engines of 2.7 liters)
Lubrication System (engines of 2.7 liters)
Emission
Fuel system
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Tightening the cylinder head



Tightening the cylinder head bolts
Fig. 2.200. Tightening the cylinder head bolts


Loosen all the bolts and tighten them to the specified torque (Fig. 2.200).
Tightening torque cylinder head bolts (engine temperature is about 20 ?° C): 25 N ?· m + (58-62 ?°) + (43-47 ?°).
When tightening the cylinder head bolts used combined Torque - angle method for tightening.

The sequence of tightening the cylinder head bolts
Fig. 2.201. The sequence of tightening the cylinder head bolts


Tighten the bolts in the sequence shown in Figure 2.201.

NOTE
Warm up the engine to operating temperature. After cooling of the engine, repeat the procedure for tightening bolts.




« previos page
Compression Test		 next page »
Adjustment of backlashes of valves

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.