REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
			Technical data
			Adjustment of corners of installation of forward wheels
			Adjustment of corners of installation of back wheels
			Front suspension with spring
			Repair strut front suspension
			Lower arm front suspension
			Front stabilizer
			Thrust the front stabilizer bar
			Traverse
			The rear spring strut
			Repair the rear spring strut
			Rear anti-roll bar
			Link rear stabilizer bar
			Transverse and longitudinal traction
			Rear cross member
			Troubleshooting
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

Repair the rear spring strut

1 - a nut;
2 - rubber element;
3 - the top plate of a spring;
4 - dust cover;

5 - stop forward stroke;
6 - coil spring;
7 - lower cam ring spring;
8 - shock.

PERFORMANCE ORDER

1. Dismantling spend in the sequence shown in the figure, taking into account the following.
2. Secure the spring strut in a vise.
A warning Close sponges of a vice plates from a soft material (copper plates).
3. Loosen the nut on the stem two to three turns.
A warning Do not remove the nut completely.
	4. The special adaptation compress a spring strut front suspension.
5. Check the condition of all details and, if necessary, repair or replace them.
6. Assemblage spend to sequences, return shown on drawing, taking into account the following.
7. Install the coil spring, placing the end of the spring in the protrusion of the lower support ring.
8. Adjust the forward stroke.