REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
			Technical data
			Check of a free wheeling of a steering wheel
			Check of effort steering
			Belt drive power steering pump
			Checking the fluid pressure in the hydraulic system
			Replacement of a protective cover of steering draft
			The steering shaft
			Steering transfer
			Power steering pump (FE DOHC)
			Disassembly and assembly of power steering pump (FE DOHC)
			Troubleshooting
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

The steering shaft

1 - a casing of a steering wheel;
2 - the switch of a sound signal;
3 - an arm;
4 - the steering wheel;
5 - damping shaft;
6 - mounting plate;

7 - a plate;
8 - an intermediate shaft;
9 - Cover the shaft;
10 - dust cover;
11 - Rod.

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.

2. Place the front wheels straight.

3. Remove the horn switch.

4. Disconnect an electric socket from the switch of a sound signal.

5. Put combination labels on a steering shaft and steering wheel for proper re-installation.

6. Remove the lock nut on the steering shaft.

7. A stripper remove a steering wheel.

8. Remove the column cover.

9. Remove the upper bracket bolts of the steering column.

10. Remove the mounting plate and the plate.

11. Remove the two clamping screws on the universal joint.

12. Remove the steering column of the vehicle.

Setting

PERFORMANCE ORDER

Installation is performed in reverse order of removal.

Dismantling

PERFORMANCE ORDER

	If necessary, remove the steering lock, cutting a pre hacksaw be cut grooves in the heads of the bolts. Remove the screws with a flat blade screwdriver and remove the steering column lock.
A warning Secure the shaft in a vise, protecting it from scratches bronze seals, or rag. When installing the ignition is necessary to use new bolts with cut head. Do not disassemble the steering column and steering shaft.

Check

PERFORMANCE ORDER

	1. Check the wear bushing steering column.
	2. Measure the length of the steering shaft. Length: 604, b ?± 1 mm
	3. Check the steering shaft universal joint in the absence of backlash, damage and jamming.
	4. Make sure that the connector does not move when the key is in the LOCK (LOCK), and moves freely when the key is in any other position.
5. Check the dust cover for cracks or damage.

Assembly

PERFORMANCE ORDER

1. The assembly is carried out in sequence, return dismantling.
	2. Install anti-theft lock on the cover. Install new mounting bolts for anti-theft lock and tighten them up until the bolt heads are not broken off.