Probable Cause   |   Remedy   | 
  Slip clutch    ??? The car does not accelerate with increasing speed of the crankshaft of the engine    ??? Lack of vehicle speed    ??? Lack of power on the climbs   | 
-   Insufficient clearance clutch pedal 
 -   Clogged hydraulic clutch 
 -   Excessive wear on the clutch disc 
 -   Seized disk splined input shaft or oil on the friction linings 
 -   Faulty pressure plate or flywheel 
 -   Loose or broken diaphragm spring 
 
  | -   Adjust the clutch pedal clearance 
 -   Clean or replace parts 
 -   Replace the clutch disc 
 -   Replace the clutch disc 
 -   Replace pressure plate or flywheel 
 -   Replace the pressure plate 
 
  | 
  Difficult gear shifting (noise when shifting gears)   | 
-   Excessive clearance of the clutch pedal 
 -   Leakage of fluid from the hydraulic clutch 
 -   Worn or corroded clutch 
 -   Excessive distortion clutch 
 
  | -   Adjust the clutch pedal clearance 
 -   Locate the leak and repair it, 
 -   Replace the clutch disc 
 -   Replace the clutch disc 
 
  | 
  Noise coupling   | 
  When the clutch is not used   | 
-   Insufficient clearance clutch pedal 
 -   Excessive wear on the clutch disc 
 
  | -   Adjust the clutch pedal clearance 
 -   Replace the clutch disc 
 
  | 
  The appearance of the noise after disconnecting the clutch   | 
-   Worn or damaged bearing clutch 
 
  | -   Replace clutch 
 
  | 
  The appearance of noise in the clutch disengagement   | 
-   Lack of lubrication on the surface of the bearing sleeve 
 -   Improperly installed clutch 
 
  | -   Coat the surface of the bearing sleeve 
 -   Repair 
 
  | 
  The appearance of the noise when the vehicle is partially included clutch   | 
-   Damaged guide sleeve 
 
  | -   Replace guide bushing 
 
  | 
  The clutch pedal is pressed hard   | 
-   Insufficient lubrication of the clutch pedal 
 -   Insufficient lubrication on the slots clutch 
 -   Insufficient lubrication on the lever shaft clutch 
 -   Insufficient lubrication of the front cover of the bearing assembly 
 
  | -   Repair 
 -   Repair 
 -   Repair 
 -   Repair 
 
  | 
  Transfers are included with difficulty or not included at all   | 
-   Insufficient clearance clutch pedal 
 -   Faulty slave cylinder 
 -   Excessive run-out clutch 
 -   Dirty or rusted splines of input shaft gearbox 
 -   Faulty clutch pressure plate 
 
  | -   Adjust the clutch pedal clearance 
 -   Repair or replace 
 -   Repair or replace 
 -   Repair 
 -   Replace the pressure plate 
 
  | 
  Slip clutch   | 
-   Insufficient clearance clutch pedal 
 -   Clogged hydraulic clutch 
 -   Worn clutch 
 -   Faulty clutch pressure plate 
 -   Fixing broken clutch fork 
 
  | -   Adjust the clutch pedal clearance 
 -   Clean or replace parts 
 -   Replace the clutch disc 
 -   Replace the pressure plate 
 -   Repair 
 
  | 
  Vibration coupling   | 
-   Clutch Disc warped, worn or it got oil 
 -   Faulty clutch pressure plate 
 -   Damaged or broken diaphragm spring 
 -   Damaged damping spring clutch 
 -   Loose mounting the sub-frame 
 
  | -   Check the clutch disc 
 -   Replace the pressure plate 
 -   Replace the pressure plate 
 -   Replace the clutch disc 
 -   Repair 
 
  | 
  Noise coupling   | 
-   Damaged clutch pedal bushing 
 -   Loose fastening in the clutch cover 
 -   Worn or dirty clutch 
 -   Fixing broken clutch fork 
 
  | -   Replace the clutch pedal bushing 
 -   Repair 
 -   Replace clutch 
 -   Repair 
 
  |