add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Technical data
Coolant
Substitution coolant
Water pump
Radiator
Checking the tightness of the cooling system
Engine radiator fan
Check the radiator cap
Back pressure valve
Thermostat
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Engine radiator fan



The sequence of removing the radiator fan

1 - slot cooling fan;
2 - a bolt, 7,8-11 N ??? m;
3 - radiator fan shroud; 		4 - radiator fan;
5 - the radiator fan motor.

Withdrawal

PERFORMANCE ORDER
1. Disconnect the negative battery terminal.
2. Drain the coolant into a suitable container.
3. Remove the intake of fresh air.
4. Disconnect from the engine cooling fan.
5. Loosen the clamp and remove the upper radiator hose.
6. Remove top two screws on the heat sink fan shroud.
7. Remove the two screws on the bottom of the radiator fan shroud.
8. Lift the fan shroud of the radiator from the engine compartment.
9. Remove the nut and remove the radiator fan.
10. Remove the three bolts and nuts and remove the radiator fan motor.

Setting

Installation is performed in reverse order of removal.




« previos page
Checking the tightness of the cooling system		 next page »
Check the radiator cap

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.