REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
			Tightening torques
			Hood
			The trunk lid
			The hinge lid
			Tailgate
			Gas-filled strut support tailgate
			Castle tailgate
			The external handle of the tailgate
			The front door
			Conformal door seal
			Backdoor
			Dashboard
			Ceiling
			Side trunk trim five-door cars
			The rear trunk trim
			The upper pillar trim
			The bottom upholstery of the central rack
			The top upholstery of the central rack
			Pillar trim four-door cars
			Pillar trim five-door cars
			Front side door trim
			Cover the front door sill
			Rear door trim
			Upholstery tailgate
			Cover rear door sill
			Rear shelf
			Upholstery rear wheel arches four-door cars
			Upholstery of an arch of a back wheel of five-door cars
			Front bumper
			Rear bumper
			The front seats
			Upholstery front seatback
			The upholstery of the front seat
			Headrest
			The leaning back hinge of a forward seat
			Rear seat
			Seat belts
			Rear seat belts
			Bracket rear seat belt
			The distances designed on a plane, for check of distances between separate points of a car body
			Actual distances of check of distances between separate points of a body of the car
		The air conditioning system
		Electrical equipment

Front side door trim

Withdrawal

PERFORMANCE ORDER

	1. Remove the internal decorative cover of a mirror.
	2. Remove the screw that secures the inner door handle.
	3. Remove the two plugs in the front of the door trim, then remove the two screws. Remove the single screw securing the back of the door trim.
4. The tool for upholstery removal release clamps of fastening the front door trim.
5. Disconnect the electrical connector from the back of the unit.
6. Lift and remove the front door trim.

Setting

PERFORMANCE ORDER

1. Install the front door trim into place. Click on the door trim until it snaps into place.
2. Connect the electrical connector to the back of the unit.
	3. Replace the three screws that secure the door trim.
	4. Screw one screw securing the door handle.
5. Establish internal decorative cover of a mirror.