REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
			Technical data
			Fuel system
			Ignition timing
			The idle speed
			Air flow meter sensor
			Knock sensor
			Throttle Position Sensor
			Check the main relay
			Checking the fuel pump relay
			Check the voltage of the front and rear heated oxygen sensors
			Checking the front and rear heated oxygen sensors
			Removing the pressure in the fuel system
			Fuel lines
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Checking the fuel injector
			Quick connections
			Fuel pump
			:20. Fuel tank
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Check of the valve closing of the canister
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

Fuel pump

Check

PERFORMANCE ORDER

	1. An additional wire connect plugs FUEL PUMP (the fuel pump) and In the diagnostic socket.
2. Remove the cap from the fuel filler toplivonalivnoy.
3. Turn on the ignition.
4. Determine whether the fuel pump, listening to the noise generated by the pump through toplivonalivnuyu neck of the fuel tank.
5. Connect the cable to the negative terminal of the battery.
A warning The fuel system is under pressure even after the engine is switched off, therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.
6. An additional wire connect plugs FUEL PUMP (the fuel pump) and In the diagnostic socket.
7. Turn the ignition switch ..
	8. Check the maximum pressure created by the fuel pump. The maximum pressure created by the fuel pump: 450-650 kPa
9. If the pressure created by the fuel pump is not correct, replace the fuel supply.