REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
			Technical data
			Removing the pressure in the fuel system
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Fuel pump
			Check the maximum pressure created by the pump
			Checking the fuel pump relay
			Checking the fuel injector
			Check of tightness of fuel atomizers
			Checking the fuel injector
			Check of resistance of fuel atomizers
			Fuel tank
			A fuel supply unit
			Pressure regulator
			Fuel lines
			Tube neck toplivonalivnoy
			Fuel filter
			Quick connections
			Fuel line
			Fuel injectors
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Pressure regulator

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Remove the rear seat cushion.
3. Disconnect from fuel supply unit.
	4. Remove the three screws that secure the cover.
5. Remove the rubber ring and disconnect wires from the cap.
6. Disconnect two fuel hoses from the fuel supply unit.
7. Remove the six screws and remove the block of the fuel supply to the fuel tank.
8. Remove the cap from the fuel supply unit.
	9. Remove the pressure regulator from the fuel pump.

Setting

PERFORMANCE ORDER

1. Install a pressure regulator.

2. Replace the cover on the fuel supply unit.

3. Install the fuel supply to the fuel tank and secure with six screws.

The inhaling moment: 10,8-16,7 N ??? m

4. Connect the two hoses to the fuel supply unit.

5. Place the rubber ring and fix wires on a cover.

6. Replace the cover and tighten the three screws.

The inhaling moment: 10,8-16,7 N ??? m

7. Connect the power supply unit of fuel.

8. Attach the wire connector with adhesive tape.

9. Install the rear seat cushion.

10. Connect the cable to the negative terminal of the battery.

next page »
Fuel lines