REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
			Check of work and adjustment of position of the selector lever
			Check of level and liquid replacement in an automatic transmission
			The procedure for replacing the liquid in the converter of an automatic transmission
			Leaks of a liquid from an automatic transmission
			Replacement of oil sealing rings
			The unit control valves
			Radiator cooling automatic transmission fluid
			Removing and installing automatic transmission
			Repair of an automatic transmission
			Oil pump
			The body of the control valve
			The switch O / D
			Switch range gearbox
			The temperature sensor of an automatic transmission
			Speed sensor at the input / turbine
			Speed sensor
			Solenoid valves
			The linear solenoid valve
			Lever
			Repair of the selector lever
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Lever

Lever

1 - ashtray;
2 - lighting the cigarette lighter socket;
3 - the front section of the center console;
4 - a box for storing small items;

5 - the center console;
6 - a cable of the selector;
7 - connector;
8 - the selector lever

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Remove the ashtray and remove the two screws.
3. Disconnect and remove the backlight cigarette lighter front section of the center console.
4. Remove the box for storing small items.
	5. Remove the two screws and four screws and remove the central console.
6. Move the selector lever to position R.
7. Remove the two screws on the cable sleeve of the selector.
	8. Remove the nuts of the selector cable.
	9. Disconnect.
	10. Remove the four nuts selector base plate and remove the selector lever assembly.

Setting

PERFORMANCE ORDER

1. Set the selector lever and secure the base plate of the selector with four nuts. The inhaling moment: 15,7-22,6 N ??? m
2. Connect the two connectors.
3. Move the selector lever to position R.
4. Install the selector cable.
5. Replace and tighten the nuts of the selector cable. The inhaling moment: 7,8-10,8 N ??? m
	6. Tighten the cable sleeve of the selector. The inhaling moment: 7,8-10,8 N ??? m
7. Screw the two bolts and four screws holding the center console.
8. Place the box for storing small items.
9. Replace the front section of the center console and the cigarette lighter Connect the backlight.
10. Replace the two screws and set the ashtray.
11. Connect the cable to the negative terminal of the battery.
12. Check the correct operation of the selector lever.