REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
			Adjusting accelerator cable
			Check the air filter element
			The elements of the exhaust system
			The filter element air filter
			Check ignition timing and idle speed
			Electronic engine control module (ECM)
			Check crankcase ventilation (PCV)
			Checking system EVAP
			Check valve system EVAP
			Checking fuel vapor separator
			Check bilateral control valve
			Check of the canister with the activated coal
			Check valve fuel vapor
			Sensor Flow air (TED)
			Check vacuum
			Sensor Flow air (TED)
			Coolant temperature
			Throttle Position Sensor
			Heated Oxygen Sensor
			:20. Checking the front and rear heated oxygen sensors
			The main relay
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

The filter element air filter

Withdrawal

PERFORMANCE ORDER

1. Loosen the clamp on the pipe inlet air flow meter sensor.

2. Disconnect the air intake tube from the air flow meter sensor.

3. Remove the six bolts securing the air filter cover and remove it.

4. Remove the air filter element from the housing.

A warning

Do not use compressed air to clean the air filter element.

5. Check the air filter element for contamination, damage and hit on it oils.

6. If necessary, replace the air filter element.

Setting

PERFORMANCE ORDER

1. Install the air filter element into the air filter housing.
2. Install the air filter cover and secure the six bolts.
	3. Connect the air inlet tube to the air flow meter sensor and fix its collar.