REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	3
		Operation and maintenance of car
			eleven Description of vehicle
			Restraint System
			Car use to destination
				Engine start
					Start the engine using a conventional key
					Start the engine using the auxiliary key with worn cards ?«Advanced Key?»
					Shutdown of the engine using the auxiliary key
				Control manual gearbox
				Control automatic transmission
				The system ESP (cruise control)
				The traction control system (TCS)
				Protivozanosnaya system (DSC)
				Stabilization of the rear axle
				Hitch
			Troubleshooting arisen in a way or before driving
			Tables
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Shutdown of the engine using the auxiliary key

1. Turn the switch lever range to "P" (Park) (in a car with automatic transmission).

2. Turn the ignition switch from position ?«ON?» (ignition on) to the "ACC" (auxiliary power consumers).

NOTE

If the battery is worn cards ?«Advanced Key?» is low, after stopping the engine and turning the ignition switch from the "ACC" position ?«LOCK?» (locking) the green light ?«KEY?», located on the instrument panel will flash for about 30 seconds . Replace discharged batteries worn card.

Press and Depress the handle of the ignition switch, located in the "ACC" (auxiliary power consumers), then rotate it to position ?«LOCK?» (locking).

ATTENTION

Leaving the car in the parking lot, make sure that the ignition switch has been turned to position ?«LOCK?» (locking).

« previos page
Start the engine using the auxiliary key with worn cards ?«Advanced Key?»

next page »
Control manual gearbox