| 1. Disconnect the negative battery terminal. |
| 2. Drain the liquid from the tank system hydrostrengthening steering. Place drip pan under the engine to collect hydraulic fluid. |
| Models with four-cylinder engine |
| 3. Remove the protective shield of the pump drive belt. |
| 4. Remove the retaining screw pump pulley. |
| 5. Remove the lock and adjusting bolt and remove the drive belt. |
 | 6. Disconnect the supply of hydraulic fluid (A) and the high pressure pipe (B) from the pump system hydrostrengthening Steering (models with 4-cylinder engine). |
| 7. Disconnect the connection of the switch system hydrostrengthening steering. |
| 8. Turn off fixing bolts and remove the pump. |
| Models with the six-cylinder engine |
 | 9. Disconnect the supply of hydraulic fluid (A) and the high pressure pipe (B) from the pump system hydrostrengthening Steering (models with 6-cylinder engine). |
| 10. Remove the right front wheel and the engine guard. |
| 11. Turn off a fixing bolt of a pulley of the pump. |
| 12. Loosen the lock and adjusting bolt and remove the drive belt. |
| 13. Disconnect the supply of hydraulic fluid. |
| 14. Disconnect the connection of the switch system hydrostrengthening steering. |
 | 15. Remove the adjusting bracket, unscrew the fixing bolts and remove the pump. |
