REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
			Introduction
			Finding a source of malfunction in the electrical system
			Circuit breakers
			Circuit Breakers
			Relay
			Interrupter of direction indicators / alarms
			Switches on the steering column
			The ignition switch and lock the drum
			The switches on the instrument panel
			Tools dashboard
			Dashboard
			The radio and speakers
			Antenna
			Bulbs headlamps
			Headlights
			Drive headlamps
			Replacing bulbs
			Wiper Engine
			Horn sound
			System of day inclusion of headlights
			Rear Defrost
			The cruise control system
			Power windows
			Central locking and remote control central locking
			Rear-view mirror with the electric drive
			The top hatch
			Air bag
		Wiring
		Tips and Tricks

printable version

Rear-view mirror with the electric drive

Rear-view mirrors with the electric motor is used two to adjust the position of the glass.

Check the conductivity controller mirrors - models Ford Probe

Position switch	The voltage at terminal
The left mirror, turn up	7
The left mirror, turn-down	1 and 2
The left mirror, turn left	2 and 7
The left mirror, turn to the right	1
The right mirror, turn up	7
The right mirror, turn-down	5 and 6
The right mirror, turn left	6 and 7
The right mirror, turn to the right	5

Check the conductivity controller mirrors - the Mazda 626 to 1997 of release

Position switch	Conductivity between plugs
The left mirror, turn up	I and J; C, I, and J
The left mirror, turn-down	I and C; L and J
The left mirror, turn left	I and C; H and J
The left mirror, turn to the right	I and H; C, L, and J
The right mirror, turn up	I and L; A, F, and J
The right mirror, turn-down	L and J; A I and
The right mirror, turn left	I and A; F and J
The right mirror, turn to the right	I and F; A, L, and J

Check the conductivity controller mirrors - models Mazda MX-6

Position switch	Conductivity between plugs
The left mirror, turn up	A and L; I and K
The left mirror, turn-down	I and A; K and L
The left mirror, turn left	I and A; D and L
The left mirror, turn to the right	A and L; D and I
The right mirror, turn up	C and L; K and I
The right mirror, turn-down	C, I; K and L
The right mirror, turn-down	C, I; K and L
The right mirror, turn to the right	I and B; L and C

Check

PERFORMANCE ORDER

1. Lower the glass door and try to adjust the position of the glass mirrors. You have to hear the noise of running engines.
	2. If noise is heard, but the glass does not move, the connecting mechanism is probably faulty. Remove and disassemble the rear-view mirror.
3. If the engine noise is not heard, check the fuse radio.
	4. If the fuse is OK, remove the switch actuator (arrow) and check power supply.
5. Check the operation of the switch, using an ohmmeter, and the Table of conductivity controller mirrors - model Probe Ford, Table conductance regulator mirrors - the Mazda 626 to 1997 of release, Table conductance regulator mirrors - models Mazda MX-6. Replace the switch if necessary.
6. Check the connecting cables between the switch and the rear view mirror.
7. Replace electric mirrors, if it is defective.

« previos page
Central locking and remote control central locking

next page »
The top hatch