 printable version
Technical data injection systems and diesel power
| ENGINE | 2,0 l | 2.2 L | 2.5 L | Rotational speed of idling at the operating temperature of> 60 ?° C / min | 700 - 800 | 690 - 790 | 610 - 710 | at cold start / heated <30 ?° C / min | 800 - 900 | 690 - 790 | 610 - 710 | Start the pump oKW ATDC | 14 ?± 0,5 | 14 ?± 0,5 | 14 ?± 0,5 | Gidrozaslonka "Enabled" / min | 1250 ?± 50 | 1000 | 1000 | "Off" / min | 2500 ?± 50 | 3500 | 3500 | Recirculation cooling gas "on" / min | 1050 ?± 50 | 1000 | 1000 | "Off" / min | 3200 ?± 50 | 3500 | 3500 | Maximum engine speed, rev / min | 5000 - 5300 | 5200 -5600 | 5200 -5600 | Bulk supply of fuel pump after 30 seconds, m 3 | 150 1) | 250 2) | 250 2) | Fuel pressure at idle, bar | 0.3 | 0.1 | 0.3 | at full load bar | 0.5 | 0.3 | 0.5 | Vacuum pump at a coolant temperature below 20 ?° C, and after 30 seconds. mode idling mbar | 700 | 700 | 700 | Pressure injection nozzles (injectors new), a bar | 115 - 125 | 115 - 125 | 115 - 125 | Used nozzle bar | 100 | 100 | 100 |
1) at a speed in excess of the starter shaft 150 rev / min
2) at a speed of idling
|
