|
|
 printable version
Front brake disc
Withdrawal
| PERFORMANCE ORDER | 1. Remove the caliper of the front wheel and hang on their own hook manufactured from wire to brake hose did not break traction.
A warning  Do not disconnect the hose, otherwise you'll have to remove the air from the brake system.
|  | 2. Remove the bolt (64) with the Allen key and remove the brake disc (61) with a wheel (69) and the collet (63). |
|
Setting | PERFORMANCE ORDER | | 1. To ensure equal braking on both sides, both rotors must have the same ground surface and the height of asperities of the surface. Check the thickness of the brake disc / lateral runout. | | 2. Check the tight fit on the support wheel brake flap. If necessary tighten bolts. | | 3. If there is rust on the flange of the brake disc and front hub, remove it with a wire brush or sandpaper. Cover the landing wheel with a thin layer of high-temperature lubricant, for example, Molykote-Paste "U", Molykote-Paste G Rapid, Liqui-Moly-Paste 36 to the brake disc in the subsequent dismantling is easily removed. | | 4. Clean the new brake discs nitrosolvent of protective lacquer. Brake discs can also be cleaned and degreased jet of high pressure steam. | | 5. Push the brake disc on the hub of the front wheel, paying attention to the tightness of protective sleeves. Tighten the new bolt with a torque of 10 Nm | | 6. Install the caliper. |
|
|
|
