 printable version
Specifications
Overview Body | Batch designation | 463 | | Design | A body frame is located on the curved staircase structure with increased stiffness to torsion, connected to the frame by bolts on rubber bearings | | The bottom and wheel wells | Covered resistant protective mastic | | Notation in the Manual of body struts (front to back) | A, B and C. |
Weight and size characteristics of the car, mm See. Specifications Door * Measurements made 30 mm below the upper edge 30 mm below the stiffener and 150 mm above the lower edge Mounting dimensions of towing equipment See. Specifications Efforts of a tightening of carving connections, Nanometer | Wiper arm nuts | | 16 | | 15 | | Nuts of fastening of the front wiper spindles on the rear bulkhead of the engine compartment | 23 | | Bolts crossbeam fastening of a radiator on the front of the vehicle | 19 | | Bolts bonnet latch | 8 | | Fixing spherical bearings tailgate | 20 | | Bolts latch tailgate | 9 | | Bolts mounting devices skobypaneli | 20 | | Bolts / nuts guides staples seatbelts | 35 | | Anchor bolts seat belts | 35 | | Bolts seatbelt buckles | 35 | | Bolts / nuts returnable reel seat belts | | 35 | | 25 | | Bolts to the sled seats | 60 | | Bolts seatbacks | 35 | | Bolts to the floor console perednegosidenya | 62.5 |
|
