| Design | It operates with a corresponding power supply system |
| The sequence of ignition | 1 - 3 - 4 - 2 |
| Moment of ignition - petrol engines: |
- with the ignition distributor, first performance
| 2 ?± 2 ?° before TDC, the distributor vacuum hose and pull the plug (without a catalyst) or a vacuum hose of the vacuum amplifier (with catalyst) |
- with the ignition distributor, the second execution
| 10 ?± 5 ?° before TDC, the vacuum hose is connected to the distributor (without catalyst) or a vacuum hose connected to the servo (with catalyst) |
Spark plug |
|
- petrol engine (normal candle)
| Champion RC9YCC or NGK6EY |
- Injection engine (normal candle)
| Champion RC9YCC or NGKBKR5EY |
| The distance between the electrodes | 0.8 - 0.9 mm |
| Thread Size | M14 |
| Thread length | 19 mm |
| The size of the hexagon | 16 mm |
| Ignition coil |
| 12B |
- The initial resistance at 20 ?° C
| about 1.0 ohms |
- Secondary resistance at 20 ?° C
| about 10.0 ohms |
| A battery |
| 12 |
| negative mass |
| 9 Ah or 65 Ah, depending on the version |
| Generator | Manufacturer |
| Magnetti-Marelli, A127 / 67 |
| Bosch KC14V 45 - 80 A |
| Adjusting switch | installed in the generator |
| Rated voltage | 12 |
| Rated power | 67A / 12B (1.6l), 80A / 12B (2.0l) |
| Start charging | 1200 rev / min (1.6 l), 1000 rev / min (2.0 l) |
| Given to current: |
| more than 48 A at 2500 rev / min |
| 80 A at 6000 rev / min |
| The minimum length of brushes | a 5.0 mm (1.6), 10 mm (2.0) |
| The spring force of the brush: |
| 1.1 - 2.7 kg |
| 1.9 kg |
| The outer diameter of contact rings: |
| 25.40 mm |
| 15.3 mm |
| Adjustable Voltage | 13.6 - 14.6 (1.6 l) |
| Starter | Manufacturer |
| Magnetti-Marelli, M79 / 1.0 |
| Magnetti-Marelli, M78 / 1.4 |
| Rated power | 1.0 kW (1.6 L) and 1.4 kW (2.0) |
| Voltage | 11.5 |
| Current consumption | less than 75 A (1.6 l), 78A (2.0 l) |
| Speed | over 6200 rev / min (1.6 l), 3000 rev / min (2.0 l) |
| The outer diameter of the collector | 28.8 mm |
| The minimum length of brushes | 3.5 mm (1.6 l), 5 mm (2.0) |
| Brush spring force: |
| 1.51 - 2.45 kg |
| 1.46 - 2.57 kg |
Fastener tightening torques are given in the text of the Head and on some graphics *.
* Highlighted text in bold torques are subject to exact observance; no bold efforts resulted only roughly.
