| 1. After assembly double check the engine oil level and coolant. |
| 2. Check the wiring connections and hoses from the engine compartment to remove any foreign objects. |
| 3. Disconnect spark plug wire and remove the spark. Remove the high-voltage wire from the distributor cap and securely connect to weight. |
| 4. Turn the crankshaft starter to the extinction of a control lamp of emergency pressure of oil. |
| 5. Replace candles and replace the spark wire and wire distributor. |
| 6. Start the engine. The engine should start after a short period of time required to fill the petrol fuel line. |
| 7. With the engine warm up carefully watch for leaks of oil, fuel or coolant. Allowed a strange odor and smoke from the parts exposed to high temperatures because of burning oil residues. |
| 8. If everything is in order, then wait until it warms up the upper radiator hose, and then stop the engine and check the oil levels and the coolant. |
| 9. Check the ignition and idle speed, stop the engine. |
| 10. After a few minutes, check the oil level and coolant, if necessary. |
| 11. If the cylinder head bolts are tightened in accordance with the present disclosure, when you first start the engine after major repairs to tighten bolts of a head is not necessary. |
| 12. If you have installed new pistons, rings, main and connecting rod bearings, the engine must be run for the first 800 kilometers. |
| 13. In the running-in period is not permitted to ride full throttle or too low speed in any gear. |
| 14. It is recommended that after the break-in oil change and filter. |
