| 1. Before its removal disconnect the negative battery terminal. |
| 2. Take a walk along the wires connecting the valve to the connector and disconnect it. |
| 3. Unscrew the two screws, then remove the valve from the throttle body and gasket. |
| 4. If the valve needs to be replaced, you must get it from the connector wire connection. |
| 5. If you do not want to disassemble the connector connection, the valve can be removed with the device to increase the speed of the engine idling and the injector. |
| 6. If necessary, after removing the valve, remove the screws and separate the two halves of the valve. |
| 7. Make sure the valve plug is easily and quickly went back to the original position under the influence of spring. |
| 8. If not, the valve must be replaced. |
| 9. Installation is spent upside-down removals. |
| 10. At installation use a new gasket. |
