| 1. Lift the front of the car and establish on supports. |
| 2. Move the selector lever to R. |
| 3. Remove the center section of the front panel. |
| 4. Remove the nut, remove the cover of a cable bracket and disconnect the cable from the selector. |
| 5. Disconnect from the switch overload and warning lamp. |
| 6. Remove the screws and remove press the selector lever. |
| 7. If necessary, remove the button and the spring switch. |
| 8. Remove the screws (access from below and from inside the passenger compartment) and remove the gear selector. |
| 9. The selector mechanism is a non-separable unit and the repair did not lie down. |
