 printable version
Seals, crankshaft
Replacement RIGHT SEAL (SEAL front cover)
| PERFORMANCE ORDER | | 1. Remove the crankshaft pulley. | | 2. Carefully remove the oil seal by prying with a screwdriver. | | 3. Clean the stuffing box and remove all burrs and sharp edges. | | 4. Grease and gently press in new shaft seal to lock the shoulder provided on the outer surface. | | 5. Remove any grease, then install the crankshaft pulley. |
|
REAR SEAL (FLYWHEEL SEAL)
| PERFORMANCE ORDER | | 1. Remove the flywheel (see. Subsection 3.1.1.15). | | 2. Pry oil seal and carefully remove the block. | | 3. Clean the stuffing box. | | 4. Grease working edges of a new shaft seal and sealing crankshaft journal with a thin layer of grease, oil seal properly orient the relatively crankcase. | | 5. Carefully put the oil seal on the crankshaft and the press-fit is straight so that the surface is flush with the oil seal flange on the engine block. | | 6. Remove grease residues, set the flywheel. |
|
|
