 printable version
The integrated module
Only for gasoline engines without catalytic converter.
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the valve. | | 2. Remove the slider. | | Hitachi distributor | | 3. Put a mark on the part of the gear core, which faces upwards. | | 4. Remove the core, remove the pin. If necessary, remove the slider. | | 5. Carefully remove the wires from the unit, memorizing the order of their arrangement. | | 6. Remove the screws and remove the module. | | Mitsubishi distributor | | 7. Remove the distributor cap. | | 8. Disconnect the wires, unscrew and remove the pin. | | 9. Remove the screws and the integrated module. |
|
Setting
| PERFORMANCE ORDER | | 1. Installation is performed in reverse order. | | 2. At the check rail Hitachi clearance between the induction sensor and the stator core, which should be 0.3-0.5 mm. | | 3. If necessary, adjust by loosening the screws and moving the stator. |
|
|
