|
|
 printable version
Replacing the air filter element
Air filter engine working volume of 1,1 and 1,3 l
1 - panel fence of warm air;
2 - pipe;
3 - a hose of giving of warm air;
4 - a hose of giving of cold air;
5 - plate of cold air intake;
6 - thermostat;
7 - damper actuator thermostat;
8 - spring latch;
9 - a vacuum hose thermostat valve actuator;
10 - Rubber yoke;
11 - plate;
12 - a lining; | 13 - the valve of the thermostat;
14 - a cover of the filter;
15 - the filter element;
16 - the filter housing;
17 - a nut;
18 - washer;
19 - Spacing sleeve;
20 - grommet;
21 - remote bush;
22 - an adjusting washer;
23 - a spring clip;
24 - a vacuum hose from the carburettor;
25 - filter gasket |
| PERFORMANCE ORDER | | 1. Detach the clamps 23 and 14 to remove the cover. | | 2. Remove the filter element 15. | | 3. Clean cloth to plug the hole in the carburetor. Wipe with a damp cloth cover and filter housing from inside. Remove the cloth from the hole. | | 4. Insert a new filter element. | | 5. Replace the cover and fasten the clamps 14, 23. |
|
Air filter of engines in working volume of 1,6 and 1,8 l
1 - crankcase ventilation hose;
2 - a collar;
3 - a spring clip;
4 - a cover of the filter;
5 - remote bush;
6 - a hose of giving of warm air;
7 - a nut of fastening of an arm;
8 - a washer;
9 - an arm;
10 - a nut fastening the front of the filter; | 11 - pin with a rubber buffer;
12 - a hose supplying cold air;
13 - damper actuator thermostat;
14 - thermostat;
15 - plate;
16 - a lining;
17 - the valve of the thermostat;
18 - the filter element;
19 - a nut of fastening of the filter;
20 - the filter housing |
| PERFORMANCE ORDER | | 1. Unscrew the nut 10. | | 2. Detach the terminals 3 and 4 to remove the cover. | | 3. Remove the filter element 18. | | 4. Clean cloth to plug the hole in the carburetor. Wipe with a damp cloth cover and filter housing from inside. Remove the cloth from the hole. | | 5. Insert a new filter element. | | 6. Replace the cover and fasten 4 clips 3. | | 7. Tighten the nut 10. |
|
|
|
