| 1. To disconnect a wire from "the minus" plug of the storage battery. |
| 2. Remove the trunk floor mat and remove the cover over the fuel level sensor. |
| 3. Disconnect from the sensor 16 terminal block with wires. |
| 4. Disconnect hoses 14 and 17 from the sensor 16. |
| 5. Unscrew the nut 15 and remove the sensor from the fuel tank 16. |
| 6. Remove the O-ring 21. |
| 7. Set the sensor 16 with a new O-ring 21. Turn the sensor so as to align the mark on the sensor and the fuel tank. |
| 8. Tighten the nut 15. |
| 9. Connect hoses to the sensor 14 and 17. |
| 10. Connect the electrical connector block. |
| 11. Install the cover in the trunk floor mat and trunk floor. |
