| Lamp headlight |
| 1. Unplug the connector with wires. |
| 2. Remove the rubber cover. |
| 3. Squeeze the spring clip 11 (see. Fig. Details headlights). |
| 4. Remove the lamp 10. |
| 5. Install the new lamp so that the projection on the lamp fell into the groove on the headlight. |
| 6. Install spring clip 11. |
| 7. Install the rubber cover. |
| 8. Attach the connector with wires. |
| 9. Adjust the headlights. |
| Lamp side light |
| 10. Turn the cartridge 1 side light bulb holder and pull out the lamp. |
| 11. Push the lamp 2 and turning, remove it from the socket 1. |
| 12. Insert the new lamp into the socket. |
| 13. Insert the cartridge with a lamp in the headlight and turn it until it stops. |
