REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Transporter, Caravelle (1990 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Transporter / Caravelle
		Instructions
			eleven Modifications bulkheads
			The system of washing and cleaning glasses
			Headlight cleaning system
			Drive wiper
			Water pump cleaning glasses
			Troubleshooting wipers
			Car wash
			Care lacquered
			Care of plastic parts
			Cleaning the glass
			Care of rubber consolidations
			Maintenance alloy wheels
			Seat belts
			Underbody protection and conservation of the semi-axes
			Care of a soft upholstery
			Starting from another source
			Towing machines
			Installing the machine on the stand
			Identification
			Schedule of service VW T4
				Maintenance oil change
				Service
				Maintenance and repair machines
					The engine and the exhaust system
						Replacing the engine oil
						Drain the engine oil
						Gulf engine oil
						Checking the oil leak by inspection
						Check engine oil level
						Checking the coolant level
						Check cooling system for leaks by visual inspection
						Check frost
						Adding concentrate VW
						Replacing spark plugs
						Check electrical connections
						Replacing the air filter element
						Draining water from the fuel filter
						Replacement filter
						Checking the V-belt
						The tension and replacement of the timing belt
						Check the exhaust system by inspection
					Brakes, tires, wheels
					Steering. Front axle
					Body, interior equipment
					Transmission. Drive wheels
					Electrical system
		Engine
		Coupling
		Transmission
		Suspension
		A steering
		Brakes
		Wheels and tires
		Body
		Electrical

Check electrical connections

PERFORMANCE ORDER

1. Check all electrical connections to the reliability of the ignition coil and the ignition distributor.

2. Cracked terminals replaced.

3. Clean corroded connections with a wire brush or sandpaper, if necessary, to cover the contact spray.

4. Contact must not be wet, otherwise contacts brush contact and cover spray.

5. Bend the high voltage cables short-range and check for cracks. Replace if necessary.

6. Install the heat sink in place and secure.