Replacement of blocks of the relay

Substitution integrated block

relays and fuses

Engine compartment

The procedure for the replacement of the united block of the relay and fuse box in the engine compartment:

1) Disconnect the negative battery cable;

2) Remove the cover of the central electronic unit;

3) Remove the bolts (2 pcs.) From the combined fuse / relay box (Fig. 10.82);

4) Open the unit by pushing the locks 9;

5) Lift the unit up;

6) reassemble in reverse order.

Substitution integrated block

relays and fuses in the cabin

The procedure for the replacement of the united block of the relay and fuse box in the passenger compartment:

1) Disconnect the negative battery cable;

2) remove the bottom cover on the driver side and disconnect the connector from the lamp lighting the floor;

3) remove the handle to open the bonnet;

4) Remove the mounting bolt from the bottom of the combined fuse / relay box (Fig. 10.83);

5) Pull down the block and remove all connectors front and rear;

6) set in reverse order, after setting the fuse box in the upper part of the recess.

Substitution integrated block

relays and fuses

The procedure for replacing the combined unit relays and fuses:

7) Disconnect the negative battery cable;

8) Remove the bottom cover on the driver side and disconnect the lamp connector from the floor;

9) Remove the two mounting bolts at the top of the central block of the relay and remove it downwards (Fig. 10.84);

10) remove the attachment of the immobilizer and move it to the side. To release the harness, remove the yellow lock in the rear;

11) Remove the wiring a special device;

12) assemble in the reverse order of removal.