printable version 
Adjusting the front windscreen washer jet
 
   The procedure for adjusting the front windscreen washer jet:  
  |   Fig.  10.86.  The zones of contact with the glass washer jets (recommended dimensions): X1 - 225 mm;  X2 - 150 mm  
  |  
 
   1) adjust the direction of the liquid jet windscreen washer as shown in  Fig.  10.86;   2) mark the point of impact of the jet on the windshield with a pen or a piece of adhesive tape;    3) Adjust the direction of the jet with a small screwdriver.  
   NOTE    Be careful not to damage the jets.   |  
  
 
 
  
		 
	 |