 printable version
Adjust the axial position of the propeller shaft
Using a 3139 device, move as far as possible, the propeller shaft to the rear of the main transmission.
| Fig. 11.6. The center of the holes for the mounting bolts of the intermediate support propeller shaft at different positions of the propeller shaft
|
In this position, mark the position of the center of the hole for the mounting bolts of the intermediate support propeller shaft (arrow A, Fig. 11.6). In this position, re-check the position of the center hole for mounting bolts of the intermediate support propeller shaft (arrow B, Fig. 11.6). Move the propeller shaft axis into a position in which the holes for the mounting bolts of the intermediate support propeller shaft will be located midway between the previously made a mark (arrow C, Fig. 11.6). Install the shims selected thickness and fix bolts intermediate support propeller shaft. Remove the device 3139 to the driveshaft. Set on the driveshaft thermofilter. Check that the exhaust system was located freely and does not touch the body.
| 
