 printable version
Battery Replacement
Uncover key.
| Fig. 13. Use a screwdriver to remove the head cover of the main keys: A - the key head cover; The - key head
|
Insert the blade of a screwdriver into the slot on top of the head of the key and pry the cap (Fig. 1.3).
| Fig. 14. The direction of removal of the housing remote control transmitter
|
Remove the cover of the transmitter remote control (Fig. 1.4).
| Fig. 15. Installing batteries in the remote control transmitter housing
|
Replace the batteries. Batteries can be purchased at the service enterprise Audi. When installing the battery, the party with the <+> must face down. The polarity of the battery is also shown on the cover of a head key (Fig. 1.5). Set cover remote control transmitter and squeeze both sides. Insert the transmitter housing into the remote control key head and squeeze both sides to clear their fixation. If the remote control transmitter does not open the locks of the car, it must be synchronized with the following steps: - Press one of the buttons on the key; - Once to unlock and lock the car door lock inserted into the lock key on the remote control transmitter. The duration of the synchronization process must not exceed 1 minute.
| 
