 printable version
Setting
When installing, use new nuts, sealing rings and clamps.
| Fig. 14.18. Fixing the steering rack mounting device VA G 1907: 1 - the screw-threaded plug, 12 Nm; 2 - setting device VA G 1907 3 - rail; 4 - the case of the steering mechanism.
|
Before installation, set the steering rack to the middle position, remove the screw plug and instead manually screw jig VA G 1907 (Fig. 14.18).
| Fig. 14.17. An arrangement of bolts (1-3) of the steering gear mounting
|
Screw a bolt of 3 fastenings of the steering mechanism and tighten its moment of 67 Nm. Finally tighten the bolts 1 and 2 securing steering torque 67 Nm.
| Fig. 14.15. Location hollow bolts return hose power steering
|
Screw banjo bolt return hose hydraulic assisted steering and tighten to 50 N ?� m (see. Fig. 14.15).
| Fig. 14.16. Location hollow bolts pressure hose power steering
|
Remove banjo bolt pressure hose hydraulic assisted steering and tighten to 40 N ?� m (see. Fig. 14.16). Release the steering column adjustment mechanism and place it in a position close to horizontal.
| Fig. 14.7. Location nuts (1) and clips (2) securing the universal joint of the steering column
|
Install the universal joint shaft on the steering Insert the eccentric screw, turn it counterclockwise, screw the nut on the bolt and tighten to 30 N ?� m (see. Fig. 14.7).
| Fig. 14.14. Location casing of a steering rod: 1 - plastic nut; 2 - lock
|
Install the cover that protects the wheel arch and secure it with a nut 1 (see. Fig. 14.14) and 2 clamps. Install the lower trim panel dashboard on the driver's side. The further installation is made in sequence, return to removal, taking into account the following. Add fluid to the hydraulic system of the power steering and bleed the air. Check the hydraulic system of the power steering for leaks. Connect a wire of "weight" to the battery. Turn on the radio and enter the code. Lift up the power window glass until it stops. Then press all the switches window again, at least 1, in the closed position of the control unit to activate windows. Set the clock.
| 
