 printable version
Withdrawal
Before disconnecting the battery, check whether you have the code switch on the radio. Switch off the ignition and disconnect a wire of "weight" from the storage battery.
| Fig. 14.40. Location screws engine cover
|
Remove the mounting bolts of the air pipe to the front transverse panel.
| Fig. 14.41. Location bracket bolts from the ignition coil, the rear electrical connectors (A) and 5-pin
|
Disconnect the 5-pin electrical connector from the ignition coil (Fig. 14.41). Remove the three rear electrical connector A (Fig. 14.41) of the ignition coil. Remove the four bolts and pull back from the ignition coil bracket.
| Fig. 14.42. Wrenching bolts radiator fan
|
Hold the pulley radiator fan from turning a special key 3212, a conventional key, unscrew the pulley bolt. Since the bolt has a left-hand thread, for loosening is necessary to rotate it clockwise (Fig. 14.42). Lift the radiator fan and remove it from the vehicle.
| Fig. 14.43. Location retainer (1) and the direction of the housing for rotating the removal of the electric radiator fan
|
To remove the electric radiator fan, disconnect the fan from the electric socket, remove the lock casing, turn the housing in the direction of the arrow (Fig. 14.43) and remove the fan.
A WARNING Chalk, markers or paint mark the direction of rotation of poly V-belt. If you are installing poly V-belt will rotate in the opposite direction, it can lead to its destruction. |
Tensioner pulley with external hexagon
| Fig. 14.44. Easing tension on the serpentine belt tensioner pulley with external hexagon on cars with six-cylinder petrol engines: the arrow shows the location of the pins 3204
|
Spanner 17 mm turn clockwise tensioner V-ribbed belt to loosen the tension. Lock the tensioner in this position, the pins 3204 (Fig. 14.44) and remove the belt from the alternator.
Tensioner pulley hexagon socket
| Fig. 14.45. Easing tension on the serpentine belt tensioner with roller with hexagon socket for vehicles with six-cylinder petrol engines: 1, 2 - the location of the pins 3204
|
Allen key 10 mm turn clockwise tensioner V-ribbed belt to loosen the tension. Lock the tensioner in this position, the pins 3204 (Fig. 14.45) and remove the belt from the alternator.
All models Remove poly V-belt from the pulleys.
| Fig. 14.35. Location pulley bolt V-belt power steering pump and a special tool to hold the pulley from turning
|
Remove the bolts ribbed belt pulley power steering pump, keeping a pulley from turning the special tool (see. Fig. 14.35). Using clamps 3094, press a discharge and suction hoses, hydraulic power steering. Set under the steering tank for collecting the effluent. Remove the bolts the pressure tube to the cylinder head.
| Fig. 14.46. Fixing the suction (1) and pressure (2) hoses for vehicles with six-cylinder petrol engines
|
Loosen the clamp and remove the suction hose 1 (see. Fig. 14.46). Remove the bolt and remove the pump pressure hose 2 (Fig. 14.46). Remove the bolts and remove the power steering pump bracket (see. Fig. 14.46). The arrows indicate the location of the bolts the power steering pump.
| 
