 printable version
Removing and installing cigarette lighter holder
You will need a screwdriver with a flat blade and Phillips. If you do not need to remove the optical fiber, then remove the cigarette lighter holder in the following order. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 2. Remove the cigarette lighter from its holder. | 3. Press the lock with a screwdriver ... |
| 4. ... remove the cigarette lighter holder and detach the connector harness. |
5. Install the parts in reverse order of removal. |
If in addition to the need to remove the cartridge cigarette lighter light guide, then remove them in the following order. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 3. Squeeze the lock, remove the pad holder harness from the console ... | 4. ... and disconnect the connector by squeezing the retainer. |
| | 5. Disconnect the harness connector from the cigarette lighter holder ... | 6. ... and from the cartridge backlight cigarette lighter. |
| | 7. Remove the four bolts (two on each side) ... | 8. ... one screw securing the bottom ... |
| | 9. ... and remove the ashtray. | 10. Press the lock with a screwdriver ... |
| | 11. ... and remove the cartridge cigarette lighter. | 12. Press the lock with a screwdriver ... |
| 13. ... and remove the fiber. |
14. Install the parts in reverse order of removal. |
| 
