 printable version
Replacement master cylinder clutch
Clutch master cylinder is removed for replacement or repair of a leak, turn off the incomplete clutch (can be caused by leakage of fluid or wear of the seal) and the partial inclusion of the clutch. You will need: the keys "10", "12" pliers. 1. Pump (eg, syringe) fluid reservoir with clutch and braking system. |
| 2. In the passenger compartment under the dashboard, remove the spring clamp finger clutch master cylinder pushrod ... |
| | 3. ... and remove your finger. | 4. Squeeze the pliers clamp tabs, slide it along the hose ... |
| | ... 5. Disconnect the supply hose from the tank fitting. | 6. Loosen the nut of the pipeline ... |
| | 7. ... and move in the direction of the pipeline. | 8. In the car, unscrew the nut studs master cylinder. |
| | 9. In the engine compartment, unscrew the nut on the master cylinder ... | 10. ... and remove the master cylinder drive clutch. |
| | 11. Squeeze the pliers clamp tabs, slide it along the hose ... | 12. ... and disconnect the hose from the nipple clutch master cylinder. |
13. Install the clutch master cylinder in the reverse order of removal. |
|
