 printable version
Starting with a booster battery
Starting with a booster battery can be dangerous if you violate the relevant instructions. Therefore, exactly follow the description of all transactions. If you are not sure that will be able to start the engine with a booster battery, we highly recommend you seek technical assistance from specialists.
ATTENTION To start the engine may only be used 12-volt battery. When applying the power supply voltage of 24 V (for example, 24-volt battery or two series-connected 12-volt batteries) starter motor, ignition system and other electrical devices of the car will break down. |
1. Ensure that the donor battery has a rated voltage of 12 V. 2. The car on which the auxiliary battery and your car should not touch each other. Stop the engine of the vehicle battery is used as an auxiliary. Turn on both cars the rest of the electrical consumers.
| Fig. 1.168. Prisoedineie second battery terminals akkumulyatoronoy
|
3. Connect the terminal extension wires strictly in the order that is listed in Figure 1.168. - Attach the terminal extension wire to the positive pole of the discharged battery (1). - Connect the second terminal of this wire to the positive terminal of the auxiliary battery (2). - Attach the terminal of another extension wire to the negative terminal of the booster battery (3). - Connect the second terminal of this wire to a massive metal parts that are far enough away from the discharged battery (4), such as bolts securing the strut. 4. Start the engine with the auxiliary battery and let it run for a few minutes. Then start the engine of the car with the discharged battery. 5. After a successful engine start Carefully remove terminals of extension cables in the reverse order.
| 
