Checking power window motor servo

1. Apply power to the positive terminal of the battery and connect to the weight of the conclusions of the electric window motor servo-E, and F, and then check the operation of the electric window motor servo.

If the operation of the motor servo window is different from that indicated in the table, replace the wiper motor.

Apply power to the positive terminal of the battery to the power window motor terminal D with servo output C connect to ground.

By incorporating the electric window motor servo measure the voltage at the terminals A and B.

If there is a fault, replace the window motor servo.

Voltage.

Pulse: max. - 12V, min. - 0 V.