 printable version
Protivozanosnaya system (DSC)
Protivozanosnaya system (CCD) automatically controls the braking of the wheels and adjusts torque developed by the engine, together with the anti-lock braking and traction control, which prevents lateral sliding and skidding car when driving on a slippery road surface or with a sharp and vigorous maneuvering. Protivozanosnaya system enhances vehicle safety. Protivozanosnaya system operates when the vehicle speed is above 20 km / h.
ATTENTION Protivozanosnaya system can not function properly if you do not adhere to the following conditions. - On all wheels of a vehicle must have the same tire recommended dimension. - All wheels must be fitted tires of the same brand, model, dimensions and with the same tread pattern, made at the same factory. - Never place a car tire with a different degree of wear of the tread. Protivozanosnaya system may not work properly if the wheels are chains or one of the wheels replaced by small-sized spare wheel. The cause of disruption of the normal functioning of the system is the difference protivozanosnoy rolling radius of the wheel. |
After turning the ignition switch to ?�ON?� (ignition switched on) due to the dashboard can be heard a clicking sound. He is accompanied by a self-test protivozanosnoy system and does not indicate any malfunction.
Operation indicator / warning lamp and traction protivozanosnoy systems. The indicator lights for a few seconds after turning the ignition switch to ?�ON?� (ignition on). Warning flashes when triggered or protivozanosnoy traction system. If the light stays on, - there may be a violation of the normal functioning of BSS systems and CCD. Contact a official Mazda dealer to check the car.
Indicator off protivozanosnoy system. The indicator lights for a few seconds after turning the ignition switch to ?�ON?� (ignition on). The indicator also lights up when you press the switch ?�DSC OFF?� and warns the driver that the ASR system and protivozanosnaya disabled.
In order to disable the traction and protivozanosnaya system, press and hold the switch ?�DSC OFF?�, until the indicator lights ?�DSC OFF?�. To re-enable the system BSS / CCD, press the switch again. This indicator ?�DSC OFF?� goes off. If the system is not turned off the CCD, when you try to bring the stuck vehicle traction control work. When you press the accelerator pedal torque developed by the engine, will not increase. In such cases, turn off the system, BSS / CCD. Disabled when the engine of the BSS / CCD is activated automatically when the ignition is switched on. For the stability of the vehicle traction and protivozanosnaya systems should be included.
| 
