add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Troubleshooting arisen in a way or before driving
Tables
Table 1.1 Dimensions of the car
Table 1.2 Specifications of engines (all models)
Table 1.3 Capacities units and systems, recommended operational materials
Table 1.4 Requirements for oil and fluid
Table 1.5 Characteristics of the pistons
Table 1.6 Specification
Table 1.7 Operations Maintenance
Table 1.8
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Table 1.7 Operations Maintenance



Table 1.7 Operations Maintenance

Specified in the table:
P - Check: Check, clean, repair, adjust or replace if necessary.
3 - Replace
About - Clear
C - Drain the sludge water
T - Tighten

* Odometer reading or months, whichever comes first.

Notes to Table 1.7:
* 1 In addition, check the belt tension and power steering pump and air conditioning compressor (if driving).
* 2 Check the spark plug type of marking on the candles. See. The technical characteristics of the spark plugs.
* 3 If the vehicle is operated in dusty conditions the air, it should be cleaned periodically and, if necessary, replace the air filter more often than specified in the table. Consult service station official dealer of Mazda.
* 4 Timing belt should be replaced every 240,000 kilometers a car or 10 years. Failure to comply with this requirement may result in engine damage.
* 5 When the operation of the vehicle is characterized by at least one of the following conditions, it is necessary to replace the engine oil and oil filter every 10,000 km or more frequently. Consult service station official dealer of Mazda.
- High dust air.
- Excessive use of engine idling or sustained movement of the car at low speed.
- Continuous operation at low ambient air or regular travel only a short distance (when the engine does not have time to warm up to normal operating temperature).
* 6 If the radiator cap or near it is marked "FL22", you should use the coolant brand FL22. When replacing the coolant in the engine cooling system using liquid brand FL22.
* 7 When the vehicle brakes are operated with a high load (for example, a dynamic driving style, while driving in mountainous terrain) or very high humidity, the brake fluid should be changed annually.





« previos page
Table 1.6 Specification
next page »
Table 1.8

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.