add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Troubleshooting arisen in a way or before driving
Spare wheel and tool kit
Engine overheating
Vehicle recovery
General information and safety measures for Inspection and maintenance of the car
Lamps lighting devices and light-signaling
Caring for your vehicle and
Corrosion protection
Prevention of corrosion
Washing and waxing paste
Removing stains
Polishing and waxing paste
Repeated application of paste wax
Care bumpers
Cleaning the interior of the car
Cleaning upholstery made of genuine leather (optional)
Carpet cleaning
Cleaning seat belts
Washing windows
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Washing and waxing paste



Car Wash, when its surface is heated by sunlight, is unacceptable, so wash it only in the shadows.
Wash the car as often as possible. Dirt is abrasive and can scratch the car, if it is not washed off. Polluted air or acid rain can damage the paint in a chemical reaction. If you live near the sea or in the region (country), where road salt is used or chemicals to care for roads, pay special attention to the underside of your car.
In the winter, or after riding on muddy wet thoroughly flush the underbody. to remove layers of dirt and corrosive materials, use a strong jet of water. Wash the car with high-quality shampoo and follow the manufacturer's instructions on the packaging. Do not use strong household cleaners, gasoline, solvents or abrasive cleaners as this may damage the paint of the car. Use a clean sponge or cloth, often wetting her, and did not damage the paint too much friction. If the dirt is stuck to, generously spray and gently remove it.
Wheel Wash with a soft brush or moistened with neutral detergent solution with a cloth from a rough wool.
To clean the plastic wheel cover, use a clean sponge or soft cloth and water.
Clean aluminum wheels weak neutral detergent solution or a mild detergent. Do not use abrasive cleaners. Exposed metal surfaces after cleaning Polish and wax paste. Since aluminum is subject to corrosion, winter after driving on roads covered with salt, wash your aluminum wheels.
After washing the car gently wipe it. Once dry, soapy water reserves in the paint stains.
After wiping the car, wipe it dry completely removing the water from the paint, but do not rub hard enough to damage it.
Upon detection of dents or scratches on the paintwork cover their repair paint to prevent the occurrence of corrosion. To protect the paintwork wash your car at least once a month. Pay special attention to the removal of salt and dirt from under the wings of the car. Make sure the drain holes are free. Paintwork damage can be caused by patches of tar, industrial emissions, remnants of charcoal and insects, if they are not to be removed immediately. If plain water is not effective enough to remove the accumulated dirt, use neutral solutions for the car wash. To remove a solution after washing necessarily wipe the car. Avoid drying solution on the paintwork.




« previos page
Prevention of corrosion
next page »
Removing stains

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.