 printable version
Display System and Alarm
Main characteristics The CAN is used for transmitting control signals input-output communication circuit dash, gauges and warning lights and warning lights. LEDs are used for all the sensors installed in the instrument cluster. Information display, which includes a clock, audio system and air conditioning system display is located in the center of the dashboard. It also includes a system of information on the drive, depending on the vehicle. Used horn fanfare type. Control devices and warning lights are indicated in Table 7.4, the specification of control devices see. Table. 7.5.
| Fig. 7.94a. Wiring diagram of the instrument cluster (part 1): 1 - the switch of reminders left in the ignition key; 2 - highlight the ignition; 3 - speedometer; 4 - tachometer; 5 - fuel gauge; 6 - coolant temperature; 7 - a microcomputer; 8 - odometer / trip mileage; 9 - the switch odometer / trip meter; 10 - a control lamp of insufficient fuel level; 11 - a control lamp of a charge of the battery; 12 - a control lamp Door open; 13 - a lamp seat belt warning; 14 - a control lamp mode HOLD; 15 - a control lamp air bags; 16 - a lamp of safety; 17 - a control lamp setting the cruise control; 18 - the main indicator lamp cruise control; 19 - on the block PCM, anti-lock brakes (ABS / TCS) HU / CM (with (ABS / TCS)) or DSC HU / CM (with DSC); 20 - unit; 21 - Lighting control switch on the dashboard; 22 - the gauge of the index of level of fuel; 23 - the brake fluid level; 24 - door limit switch (driver's side); 25 - Limit switch door (passenger side); 26 - Limit switch door (rear left side); 27 - Limit switch door (rear right side); 28 - the switch belt buckle; 29 - the block of SAS; 30 - timer block the door lock; 31 - security system control module; 32 - Systems actuator automatic speed control; 33 - to the microcomputer
|
Wiring diagram of the instrument cluster is shown in Fig. 7.94a, 7.94b.
| Fig. 7.94b. Wiring diagram of the instrument cluster (part 2): 1 - the switch of turn indicators; 2 - flasher and alarm; 3 - switch the alarm; 4 - turn signal (left); 5 - turn signal (right); 6 - the relay front fog lights; 7 - switch the front fog lamp; 8 - the relay of the rear fog lamp; 9 - the switch of the rear fog lamp; 10 - the relay TNS; 11 - headlight switch; 12 - headlight switch; 13 - light (left); 14 - light (right); 15 - a control lamp off of TCS; 16 - light alarm level of liquid in the washer tank; 17 - indicator Indicator (left); 18 - indicator Indicator (right); 19 - a control lamp front fog lamps; 20 - a control lamp rear fog lamp; 21 - lighting of the instrument cluster; 22 - a control lamp DSCATCS; 23 - a control lamp off of DSC; 24 - warning light anti-lock brakes; 25 - alarm lamp brake system; 26 - a control lamp of insufficient oil level; 27 - a control lamp of a headlamp; 28 - indicator selector control circuit; 29 - washer fluid level sensor; 30 - the switch of the parking braking system; 31 - the gauge of pressure of oil; 32 - to the microcomputer
|
Table 7.4 Control devices and warning lights
Table 7.5 Specification of control devices
| 
