printable version
Removing and installing the module of the central panel
Turn off the anti-theft system (vehicles with anti-theft system). Disconnect the negative battery cable. Remove the glovebox. Remove the rear console.
Pull the center panel module to itself, then disconnect the terminal A of the instrument panel and remove the module (Fig. 7.80).
| Fig. 7.81. Removing the central panel: 1 - the scale (only air conditioning with manual control); 2 - the screw (only air conditioning with manual control); 3 - the screw; 4 - a bolt; 5 - unit of the central panel; 6 - connector; 7 - the antenna feed
|
Remove in the order indicated in Figure 7.81. Install in the reverse order of removal.
ATTENTION Make sure the wiring harness and the antenna feed is not caught between the unit and the instrument panel, otherwise it may cause a malfunction. |
Turn on the anti-theft system by entering the code.
|