REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
			Introduction
			Maintenance and repair of body
			Vinyl trim
			Repair of insignificant damages of a body
			Repair of considerable damages of a body
			Hinges and locks
			Replacing windshield and windows neopuskayuschihsya
			Replacement grille (model Mazda 626)
			Hood
			Bumpers - removal and installation
			Front fender
			The plastic panel before a windshield
			Door trim panel
			Door
			The door lock, the drum lock and handle
			Glass doors
			Mechanism window
			Rear view mirrors
			The trunk lid (the Mazda 626 and MX-6)
			Castle and lock drum lid (model Mazda 626 and MX-6)
			Ropes opening the boot lid / fuel filler flap
			The back door (model Ford Probe)
			Lock the back door and the lock drum (model Ford Probe)
			The support legs tailgate / boot lid (model Ford Probe, MX-6)
			The center console
			Panels finishing dashboard
			Column cover
			Dashboard
			Seats
		Electrical
		Wiring
		Tips and Tricks

Panels finishing dashboard

Refitting

PERFORMANCE ORDER

1. Disconnect the battery.
Panel finishes dashboard
2. Lower the steering column down.
3. Remove the lower trim panel.
	4. On models Ford Probe remove the five mounting screws (indicated by arrows) and remove the trim panel.
	5. Mazda models, remove the upper mounting screws (indicated by arrows).
	6. Mazda models, remove the bottom mounting screws (indicated by arrows), release fixing latch and remove the furnish panel.
7. Installation is spent upside-down removals.
Lower trim panel
8. Remove the front section of the center console.
9. Remove the hood release handle.
	10. Turn off fixing screws (are specified by arrows), release the latch and remove the trim panel.
11. Installation is spent upside-down removals.
The central panel trim
12. Remove the center console.
	13. Remove the bottom mounting screws (indicated by arrows), release the latch and remove the trim panel.
14. Installation is spent upside-down removals.
The glove compartment
	15. Open the glove box, squeeze the edge of the glove box and lower it down.
	16. Turn off fixing screws (are specified by arrows) and remove the glove box.
17. Installation is spent upside-down removals.

next page »
Column cover