|
printable version
Release bearing release bearing and fork
Withdrawal PERFORMANCE ORDER | 1. Remove the slave cylinder clutch. | 2. Remove the gearbox. | | 3. Remove the plug bearing with ball joint, push the spring and remove release bearing, together with a fork. |
|
Inspection PERFORMANCE ORDER | | 1. Try to rotate the inner race of the bearing by pushing on it. Replace the bearing if necessary. | 2. Inspect the clutch release lever for cracks or deformation. |
|
Setting PERFORMANCE ORDER | | 1. Fill in the inner groove of the release bearing with high temperature grease. Also grease the splines of the input shaft, ball bearings and bearing mount. | | | 2. Apply high temperature grease slot on the lever and release bearing ends of the fork, install the bearing on the fork. | 3. Set the bearing on the shaft and install the plug bearing upon the ball. | 4. Further installation is spent upside-down removals. |
|
|
|