REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Almera (from 1995 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Almera
		General Information
		General requirements for car repair
		Operation and maintenance of car
		Petrol engines
		Diesel engines
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Basic information
			Body repair
			Heating and ventilation system
			Climate control (air conditioning)
			The system of airbags and seat belt pretensioners
				Turn off and on the unit airbags and pyrotechnic devices seatbelts
				Removing and installing airbag unit driver's side
				Removal and installation of the rotary switch with a spiral spring (only for complete dual airbags)
				Removing and installing passenger airbag unit
				Seat belts with pyrotechnic
				Removal and installation of a pyrotechnic device pretensioning seat belts
		Applications
		Scheme of electrical equipment

printable version

Removing and installing passenger airbag unit

Fig. 9.51. Unit passenger airbag: 1 - the location of the unit; 2 - bolts marked RESISTORX T50; 3 - nuts; 4 - connector block

Open the glove box, pull the inner loop and remove the box. Disconnect the electrical connector from the pillow block. Remove the six screws securing the block of a pillow with a key with a nozzle RESISTORX T50, and then remove the four fixing nuts (Fig. 9.51). In accordance with the security measures, remove the pillow block.

Install in the reverse order of removal, thus replace the six screws securing the unit and carry out a check of its inclusion.

« previos page
Removal and installation of the rotary switch with a spiral spring (only for complete dual airbags)

next page »
Seat belts with pyrotechnic