 printable version
Hood
| Fig. 1.24. Bonnet release lever inside the car: 1 - the lever
|
To unlock the hood and pull the lever to the left under the front panel - the hood of the engine compartment is free from the locking device and rapidly rises slightly upward by a spring (Fig. 1.24).
NOTE Before opening the hood it is necessary to see to it that the wiper arms are not tilted forward. Otherwise, it may damage the paintwork. |
Opening The hood should be some lift and pull the knob in the direction of the arrow - see. Right picture. This will be released the locking hook. Lift the bonnet and open it all the way into the hood is held open the gas cylinder-stop.
Closing Grasp the hood from the cylinder-stop. Pull the hood down until until it is overcome soprotiv tion cylinder-stop and then let the hood free fall in lock ny castle - do not apply pressure.
ATTENTION For safety reasons, when the vehicle hood must always be locked. So every time you close the hood LIS check whether the locking device has gone into engagement. The hood must be securely connected to the respective elements of the body. If while driving will be observed that the hood locking device does not work, you should immediately stop and lock the hood of the engine compartment. |
| 
